Blades, Knives & Cutters
Saw blades, band saw blades, cutterheads, knives, router bits, shaper cutters and abrasives.
Machine selection, used inspection, parts, dust collection, shop planning and eBay inventory.
Blades, Knives & CuttersTable Saw Blades
Diameter, arbor, kerf, tooth geometry, plate and intended material.
Blades, Knives & CuttersCombination Saw Blades
General-purpose tooth patterns balancing ripping and crosscutting.
Blades, Knives & CuttersRip Blades
Lower tooth counts and gullets for efficient ripping.
Blades, Knives & CuttersCrosscut Blades
Higher tooth counts and geometry for clean crosscuts.
Blades, Knives & CuttersPlywood and Melamine Blades
Fine-tooth blades and scoring strategies for sheet goods.
Blades, Knives & CuttersDado Sets
Stacked and wobble systems requiring saw, arbor and guard compatibility.
Blades, Knives & CuttersBand Saw Blades
Length, width, TPI, set, material and wheel compatibility.
Blades, Knives & CuttersResaw Blades
Wide coarse blades matched to frame, tension and wheel size.
Blades, Knives & CuttersScroll Saw Blades
Pinned and pinless blades by tooth pattern and material.
Blades, Knives & CuttersPlaner Knives
Straight, disposable and indexed knives by exact cutterhead.
Blades, Knives & CuttersJointer Knives
Length, width, thickness, holes and setting method.
Blades, Knives & CuttersHelical Cutterheads
Spiral insert heads by machine model, diameter and bearing fit.
Blades, Knives & CuttersCarbide Inserts
Size, hole, radius, grade and screw compatibility.
Blades, Knives & CuttersShaper Cutters
Bore, profile, spindle speed, guard and feeder compatibility.
Blades, Knives & CuttersMoulding Heads
Profile knives, head rating, balance and machine approval.
Blades, Knives & CuttersRouter Bits
Shank, diameter, profile, speed, bearing and table use.
Blades, Knives & CuttersCNC Router Bits
Geometry, coating, shank and material-specific tooling.
Blades, Knives & CuttersForstner Bits
Diameter, rim, center, shank and drilling-machine capacity.
Blades, Knives & CuttersBrad-Point Bits
Clean entry and accurate wood drilling.
Blades, Knives & CuttersMortising Chisels
Chisel and bit sets matched to mortiser and bushing.
Blades, Knives & CuttersLathe Chucks
Spindle thread, insert, jaw range and turning application.
Blades, Knives & CuttersLathe Centers
Morse taper, drive style, live bearings and capacity.
Blades, Knives & CuttersLathe Tool Rests
Post diameter, length, profile and banjo compatibility.
Blades, Knives & CuttersTurning Tools
Gouges, scrapers, parting tools and carbide systems.
Blades, Knives & CuttersSanding Belts
Length, width, backing, abrasive and grit.
Blades, Knives & CuttersSanding Discs
Diameter, hole pattern, adhesive or hook-and-loop backing.
Blades, Knives & CuttersDrum Sander Abrasives
Roll width, backing, attachment and grit progression.
Blades, Knives & CuttersWide Belt Abrasives
Belt dimensions, joint, backing and grit.
Blades, Knives & CuttersKnife-Setting Jigs
Magnetic and dial systems for straight-knife cutterheads.
Blades, Knives & CuttersBlade Cleaning Systems
Pitch and resin removal without damaging carbide or coatings.